You may program up to 4 transmitters, using either of the two following procedures:
Transmitter Programming Procedure (No Tools Required)
Close all the vehicle doors.
Insert the ignition key into the ignition lock cylinder.
Press and hold the door unlock switch.
While holding the door lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF.
Release the door unlock switch. The doors will lock and unlock to confirm the program mode.
OR
Press and hold the LOCK button and the UNLOCK button simultaneously on one transmitter. After a delay of approximately 15 seconds, the doors will lock and unlock to confirm the programming of that transmitter.
Repeat the previous step to program up to four transmitters.
Turn the ignition switch to the RUN position in order to exit the keyless entry transmitter mode.
Operate the transmitter functions in order to verify correct system operation
How program my keyless entry remotes for 2003 chevy malibu
I have a use remote that I need to program
Check out this site www.programyourremote.com .....
go to the site programyourremote.com
how do you program keyless entry remote 98 GMC
How do you program a keyless entry remote for a 2005 KIA Amanti? Kent
I am pretty positive that only a Chevy dealer can program the remote keyless entry device for you.
can soneone help me? i lost all my remote keyless entry for my 2003 Chevy express van and i just got a new repacement. but i don't know how to program it.. can soneone help?
How to program a keyless entry remote for 2008 Pontiac g5
How to program a keyless entry remote for 2008 pontiac g5
how to programm keyless entry remote for 2005 kia spectra5
The 1989 Buick Park Avenue does not come with a remote keyless entry. The keyless remote entry was not available till 1997.