This is out of an owners manual for a 2004 Impala (at least 2001-2005 should be the same) ... FOB PROG (Remote Keyless Entry Transmitter Programming) This feature allows you to match the remote keyless entry transmitter to your vehicle. To match the transmitter do the following: 1. Scroll, using the SEEK/PSCAN up or down arrows, until FOB PROG appears on the display. 2. Press the PREV or NEXT button to enter the submenu. BEGIN will be displayed. 3. Press the TUNE/DISP button to start programming. When the message PUSH FOB flashes, press and hold the LOCK and UNLOCK buttons on the first transmitter at the same time for 15 seconds. A chime will be heard to verify the transmitter is learned. 4. Repeat Step 3 for each additional transmitter. The transmitter is programmed now. You can either exit the programming mode by following the instructions later in this section or program the next feature available on your vehicle.
how do you program your keyless remote for 2003 Chevy blazer
How do i you program keyless remote for a 2004 malibu?
how do you program keyless entry remote for 2008 Chevy impala For the LT it's on page 3-48 of the "Owner's Manual", (relearn remote key) done thru the Vehicle Information button of the Driver Information Center...
How program my keyless entry remotes for 2003 chevy malibu
I have a use remote that I need to program
See FOB PROG (Remote Keyless Entry Transmitter Programming) on page 2-45 of your "Owner's Manual", under Section 2: Features and Controls - Vehicle Personalization.....
See FOB PROG (Remote Keyless Entry Transmitter Programming) on page 2-29 of your "Owner's Manual", under Section 2: Features and Controls - Vehicle Customization Settings.....
This vehicle requires a scan tool to program the remote, a dealer or locksmith will have to do it.
Id say eBay or Amazon just got to make sure the number on the back of remote matches the car :-) and you should be able to program it through the stereo
Try this site www.programyourremote.com
replaced battery and now remote doesnt work . how do you reprogram remote
you have to resync the remote after changing the battery, stand next to car hold the lock and unlock buttons down for about 7 seconds or until you hear the horn chirp, thats it good luckSource(s):Impala LS owner