1. Move the driver's seat forward, and locate the security system control unit mounted on the underneath the seat.
2. Turn on ignition switch on.
3. Press and hold the green programming button on the control unit with a pen. you will have to poke through a hole about the size of a pencil located on the side of the unit. when the security system LED on the instrument panel comes on, release the program button, (Step 3 and 4 must be done within 5 seconds of each other.)
4. Press and release the top button on the transmitter, check that the LED goes out chirps once, and the front marker lights flash to confirm that the transmitter's code worked by the control unit.
5. if you have other transmitters to program, repeat steps 3 and 4.
6. Turn the ignition switch off to exit the programming mode.
How do i you program keyless remote for a 2004 malibu?
how do you program your keyless remote for 2003 Chevy blazer
How to program a keyless entry remote for 2008 Pontiac g5
How do I program a keyless remote for a 2007 Hyundai Azeva
How do u program a keyless remote for a 2000 GMC Yukon
I need instructions on how to program a keyless remote for a 1999 Cadillac Deville.
How to program a keyless entry remote for 2008 pontiac g5
how do you program keyless entry remote 98 GMC
How do you program a keyless entry remote for a 2005 KIA Amanti? Kent
You will need a scan tool to program this Keyless Fob.
I have a use remote that I need to program
how to programm keyless entry remote for 2005 kia spectra5