Try This:
Press and hold the drivers side power UNLOCK button.
Insert key into the ignition, Turn it ON, OFF. Repeat this step twice.
At this point the power door locks should cycle to indicate the vehicle is in program mode, ready to accept programming.
Press and hold the LOCK and UNLOCK buttons on the transmitter.
The power door locks should cycle to indicate successful programming.
Turn the ignition ON to exit program mode.
I tried this on my 2002 Trailblazer, this did not work
The dealer scan tool is required to program a remote.
One reason that a keyless entry remote will not open the doors is a dead battery, either on the vehicle or the key itself. Another reason is that the remote needs to be reprogrammed.
That info MAY be at programyourremote.com (program your remote.com)
programyourremote.com simply put.. "Program Your Remote.com"
In order to program a VW Gold 2002 keyless entry, you would need the metal key flip, keyless entry remote and the immobilizer chip. Once you program the three components, you would have to program the immobilizer chip separately.?æ
this a lot of bs, please unsubsrcibe me from your site.
See FOB PROG (Remote Keyless Entry Transmitter Programming) on page 2-29 of your "Owner's Manual", under Section 2: Features and Controls - Vehicle Customization Settings.....
purchase two keyless remotes without instruction. How do you program them for a 2002 Pontiac Bonneville
See "Programming the Transmitters" on page 10 in chapter 2 "Keys and Doors" of your "OWNER'S MANUAL".....
Your keyless remote might not work for your 2002 Chevy Tahoe because the battery in the remote is dead. You can replace this battery by prying the remote cover off of the back of the remote or by removing the screws holding the cover closed.
No.
The battery in the remote needs to be replaced.