answersLogoWhite

0


Best Answer

Steps:

  • Open the hood of your SUV.
  • Behind the battery on the drivers side is a plastic covered connector labeled Diagnostics.
  • Open the plastic cover on the Diagnostics port by pulling up on the edge near the FRONT of the vehicle.
  • Get your prepped/stripped jumper wire and place one end in connector 6 as shown in the pictures.
  • Run the other end of the jumper wire to the POSITIVE terminal on your battery, you can just push it into the little opening on there so it stays in place for a few minutes.
  • Get into your vehicle with your key fobs.
  • Put one key into your ignition and turn to ON position, DO NOT start your vehicle.
  • If you just have ONE key fob to reprogram, when you turn the vehicle to ON, hold the LOCK button down for 3 seconds, the lights on the dash will go off, and you are done. Turn the key off, disconnect the wire, and try the key fob.
  • If you have TWO key fobs to reprogram, turn the key to ON, hold the first LOCK button for 1 second, then the second one for 1 second. Turn the key off after the lights on the dash go off and remove the jumper wire. Test both Key Fobs.
User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you program a keyless remote to a 2003 Kia Sorento?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you program your keyless remote for a 2003 Chevy Blazer?

how do you program your keyless remote for 2003 Chevy blazer


How do you program a keyless remote for a 2003 Chevy Malibu?

How program my keyless entry remotes for 2003 chevy malibu


How do you program a keyless remote for an 2003 Chevy Avalanche?

Look in your owners manual for the directions.


How do you program a keyless entry remote for a 2003 Chevy Express 3500 van?

can soneone help me? i lost all my remote keyless entry for my 2003 Chevy express van and i just got a new repacement. but i don't know how to program it.. can soneone help?


How do you program factory keyless remote for 2003 hummer?

as far as I know you have to have the dealership do it cause they have to read the codes in the computer to set the remote


How do you program a key less entry remote for a 2003 Jeep Grand Cherokee?

I had the same problem. Google "keyless entry remote 2003 Jeep Grand Cherokee".


How do you program a keyless remote for a 2001 Hyundai Elantra?

I found an Internet site which says how to program the keyless entry remote. But there is an error: this procedure is good for Elantra 2001 to 2003. Elantra 2004 must be programmed by the dealer. http://car.justanswer.com/hyundai/n1kw-program-remote-entry-hyundai-2004


How do you program a keyless remote for a 2003 Chevrolet Blazer?

A dealership has to do it for you if it is the original from the dealer. If it is aftermarket, like one from car toys they will have to do it for you. Only the company that installed it will have the codes to program it. I have a 2003 xtreme myself, and i have a dealer keyless entry, but I had car toy's install an alarm with other remote functions, only they can program the newer one.


How do you program a keyless remote for a 2003 Saturn L300?

The Saturn dealership did all three of mine free of charge.


How do you program extra keyless remotes for 2003 Dodge Ram 1500 when you have one remote that is already programmed?

You will need a scan tool to do that.


How do you program keyless entry remote for 2003 kia sorrento?

first of all, you cannot program the key individually..it need to be taken to the dealership or the company which the car was purchased.


Does a 2003 Dodge Ram 1500 have a keyless remote?

Yes, it could.