1. Start with the key out of the ignition, drivers door is open all others closed and
drivers door is unlocked.
2. Perform these steps within 5 seconds.
A. Insert the key into the ignition(Do NOT Turn) Pull key out.
B. Insert the key into the ignition(Do NOT Turn) Pull key out.
3. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Insert the key into the ignition(Do NOT Turn) Pull key out.
4. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Insert the key into ignition and leave it in ignition.
D. Close the drivers door.
E. Turn the ignition to ON (Do NOT Start) then back to OFF.
F. Remove the key from the ignition.
5. Within 3 seconds, the power door locks should lock then unlock automatically
indicating successful entry into programming mode.
Return to step 1 if the locks do not cycle at this point.
6. Perform these steps within 40 seconds.
A. Press the lock and unlock buttons on the remtoe simutaneously for 1.5 seconds.
B. Immediately after letting go of the lock and unlock buttons,
Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door
locks should lock and then unlock once indicating successful programming. If
the door locks cycle twice, repeat steps A and B in step 6 as the remote was
not accepted.
C. Repeat steps A and B in step 6 for each new remote.
7. Open drivers door.
This vehicle requires a scan tool to program the remote, a dealer or locksmith will have to do it.
how do you program your remote
The oil capacity for an 06 Corolla is four quarts. Overfilling the oil can cause many mechanical issues and failures.
How do i program my remote car starter / lawless remote
No you can not.
how to program remote for mini cooper
You can't program FXTG remote.
how to program another remote from a existing car alarm remote immobilizer
You can program your Kia Sedona remote, by holding the lock and unlock keys at the same time. The red light will flash until the remote is program. When the remote is program. The red light will stay constant.
how to program remote control 2007 Cadillac escalade
Program key remote 2007 mustang?
how to program remote for mini cooper