0
How do you program a sharper image jumbo touch screen universal remote control that doesnt have a code search button?
ShyGirl1422
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you program an RCA universal remote without a program code?
how to program my tv with the RCA D 770 - universal remote control which has no code search button
How do you program a GE universal gemstar remote control for a mgnovox TV?
Hold the button you want to program and then hold the on/off button at the same time it should program
How do I program GPT universal remote control?
To program a GPT universal remote control, hold down the power button at the same time with the button for the device that is going to be programmed. When the other buttons on the remote blink, let up and press on the power button again. The device should turn on. If not, repeat the process.
Where is the select button on a universal remote control?
There is no Select button on an XBOX 360 controller. There is a "Start" button, a middle home button (The large "X") and a "Back button".
What are the codes for the Tevion universal remote control?
I do not have the code for my samsung dvd/vcr combo model vr370 to enter into my tevion big button universal remote control
How do you program a GE universal remote to a GE converter box?
You can program your GE universal remote, to your converter box, by holding the power button in until the auxiliary read lights aluminate red. Select auxiliary and input the proper code.
When was Universal Edit Button created?
Universal Edit Button was created on 2008-06-19.
How do you program your iHip universal tv remote?
there is no cable button on this remote what do i push to hook cable its says hit cable button
Can you program a cox remote to work with a digital converter box?
remotes that are built for cable boxes like the cox remote is a universal remote control. although this is a universal remote, it normally will only work with cox digital converter cable boxes. therefore if the digital converter box that you want to control is from cox or motorola (or similar supported affiliate of cox) then pressing the CABLE button will control that said digital converter box. The AUX button will normally not control another digital cable box, because the manufacturer figures that the only converter STB that you will be using is theirs. thus, the CABLE button is only set for their STB. Normally to control weird or unpopular digital converter boxes - universal remotes are recommended. there are many brands, but make sure you find a learning universal remote. so in case the digital converter box code is not in the universal remote (like in the cox universal remote) then you can program it in yourself - hence the term "learning remote" i picked up a ton of these last year for christmas for everyone in my family because they were dirt cheap and most ppl watch tv. so a universal learning remote for everyone was convenient & cost efficient for the state of the economy last year. i posted a link of where i got mine from, but there are many on the market. find what you like & purchase it, but make sure its a learning universal remote.
You have a sentry really big universal remote model no rmc-10 you have a haier tv and you program with the code for that tv but when push a button it does not response to the right button example when?
YOU NEED REALLY BIG BATTERIES
Need codes remote control rca universal guide plus gemstar?
InstructionsAutomatic Code Search1 Turn on the first device you want to program to the Gemstar remote control.2 Hold down the button you want to program, for example "DVD," while holding the "ON/OFF" button until the red indicator light comes on. The remote control is now in programming mode.3 Point the Gemstar remote control at the device and press the "Play" button. The indicator light will blink for approximately five seconds as it searches the first group of codes.4 Press the "Play" button after the indicator light stops blinking to check the first group of codes. Continue doing this until the device powers down.5 Push the "Reverse" button and wait approximately 2 seconds. Continue doing this until the device turns on again.6 Save the code setting by pressing and holding the "Stop" button until the indicator light stops blinking.7 Repeat Steps 1 to 6 for each device you want to program to the Gemstar remote control.Direct Code Input8 Review the last page of the RCA Gemstar remote control user manual. This page has a list of device manufacturers. Look up your device's manufacturer to find the remote codes for your device.9 Turn on the device you want to program to the remote control.10 Press and hold the button you want to program, such as "SAT/CABLE," and use the keypad on the remote control to enter the first code from the list.11 Release the button you want to program and press the "ON/OFF" button to see if the programmed code worked. The device should shut off if the code was successful.12 Repeat Steps 3 and 4 with the next code on the list until you find a code that operates the device.13 Program the rest of the devices you want controlled by the Gemstar universal remote control by repeating Steps 1 to 5.
How do I am program an RCA model RCRN04GR universal remote control?
To program the remote with the codes, firstly, turn on the electronic gadget for which you are going to use this remote, by pressing the On and Off button. Then locate the Setup or the Code Search key on the remote control. These buttons may vary from remote to remote. Just hold on the setup or the code search key for 5 - 10 seconds or till the light on the remote
