1. Close all vehicle doors.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver's door panel-continue to hold
down until instructed to release in step 9.
4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the ignition switch to the ON position (as far as you can go without starting the
engine).
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock
the doors automatically.
10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until
the door locks and unlocks.
This step may take up to 30 seconds.
11. Repeat step 10 NOW for each additional transmitter (including any existing
transmitters).
12. Turn the ignition switch to the ON position in order to exit the transmitter programming
mode.
How do you program a key fob to a 2003 Chevy Malibu
trying to set up and program 2003 Nissan altima key fob
You don't. Take the car and the new fob to a caddy dealer or a locksmith who has the equipment to program it.
Yes it can. If its a lhj011
at the Saturn dealer. or a decent auto locksmith
To program any kind of key fob you have to take it to a dealership.
How do I re program my key fob for renault laguna estate 1997?
what is the replacement battery for a 2003 Honda accord key fob
To add a new key fob, take the vehicle and the key fob to an authorized dealer. To re-program a key fob after replacing it's battery, open the key fob, then read and follow the instructions inside.
http://www.ehow.com/how_7456283_program-key-fob-harley-davidson.html
The key fob programing requires the dealer's scan tool.
It is possible to program one key fob to use on two different cars. If the key fob uses a primitive fixed code system, programming two cars will not work.