Jack the car up and secure on axle stands etc. Remove the road wheel. Remove the pad retaining wire clip with pliers. Remove the 2 plastic caps at the rear of the brake caliper, then the two 7mm Allen bolt sliders. Pull the caliper with the pads forward and away from the disc. Then remove the 2 larger Allen bolts securing the caliper carrier to the hub. Now remove the 5mm Allen bolt securing the disc to the hub and give the edge of the disc a bash with a rawhide mallett etc and it should come straight off.
Good luck!!
how do i change the front bumper on my 1999 vauxhall vetra
under the front ashtray
32psi front 30 in rear
on n/s front behind spoiler
The ecu unit in a 2002 Vauxhall Vectra is located in the engine compartment of the vehicle. The computer can be seen behind the engine in front of the firewall on the passenger side.
yes you can. but the front will sit way too high because of the different spring ratings with the v6 front springs having to carry alot more weight.
Good ones
unscrew the front grill then open the catch by hand. i fixed mine in 2 mins
take out glove box remove light for glove box it right in front
To remove the poor panel on Vectra the screwdriver that will be used to unscrew the screws. Once the screws have been removed, the door panel on Vectra can then be removed.
Check the front brake sensors. Replace them if they are worn out. Make sure you get the correct front brake sensors.
Send me photos of the front and back of the headlamp to the email address on my bio page, and I'm pretty sure we can figure it out.