unbolt fuel rail and pull the entire rail up clean the holes and o-rings get some extra o-rings some may tear or be very wornpull off the clip and remove injector from rail.use a little vaseline on o-rings to put it all back together.make shure they are all seated before driving.
It should pull out with a little wiggle and twisting.
yes
Pull out the upper intake manifold. they are near the injectors in the front.
Mine does! i have a 5.7L hemi in a 2003 dodge ram 1500 shortbed.
No, pulling the transmission is not required.
Pull the gas tank and replace the pump.
you should be able to just drop the oil pan and axcess the oil pump. you may have to jack the motor up a bit tho.
Depends on the engine and transmission, and whether or not it is equipped with a towing package
Yes, just stay in recommended towing capacity,
depends if its a 5.2 318 or the 5.9 360 but its a dodge itl pull but everyone has their opinion about dodge, i dont see many problems with them at all.
There isn't a position that tells the gear ratio. The dealer can enter the VIN in their computer system and pull up the build codes to see what ratio it was built with.
pull the light switch outward with clearance light or headlights on!