What an answerable question. You have provided oodles of information
you have a bad clip.
Okay, so you have a clip attached to the bottom of the carbine. Push in the button NEXT to the clip on the gun. Gently pull on the clip, it will come out. You need 30 caliber bullets. Not 30-06 or 30-30, just 30 caliber. Just ask the clerk and he will help you out. A small rectangular clip holds fifteen bullets, so push them in. Make sure the bullets are not at the front of the clip, but at the back of the clip, or the gun will jam. Push the clip back in, pull the lever on the right side of the gun as far back as it will go, and just let go. If you try to slow the lever or guide it back into place, the gun won't load properly. Obviously, don't point the gun at someone as you're doing this. It is Semi-automatic, so you don't need to do anything as you're shooting. It is a beautiful gun, so have fun!
hit the tab at the back of the spent clip the old clip should fall out put a full clip back in and pull the tab on the side of the gun all the way back then let it go it shold snap back into place with a bullet in the chamber now its ready to shoot
Because it is a toy gun and cheap
put the two guns together, slide on the scope, put the darts in the 2 clips and put one clip in the stock on the back, and load one in the gun.
Clip is a mosnomer for magazine, which is the part of the gun that holds the bbs, and feeds them into the gun.
Gun the Man Down - 1956 was released on: USA: 15 November 1956
you have to get the USP pistol and empty the clip and when you reload it will "flip" the gun
Magazine, not clip. And what gun is it for, specifically? Without knowing this, your best bet would be to check your local gun shops, gun shows, e-gunparts.com, ammoclip.com, gunbroker.com, auctionarms.com, etc.
Gun shop or gunsmith
It would help if you were more specific... but you load BBs into the trap door on the clip, pull down the clip mechanism, shake BBs into place, reset clip mech., insert clip into gun, pull back cock, turn safety off, aim, fire.
Few steps which will keep your Nerf gun out of jam. 1. When you see that the bolt won't go forward and you can't pull the trigger, pull the bolt back a little to get a start and slam the bolt forward.2. Push the clip release button and PULL the clip out (it doesn't really want to come out, but it won't damage anything, I hope).3. With no clip in the gun, there's still a dart in the chamber. You can fish it out through the breach access, but that might deform the dart and isn't as fun as my method. Pull the bolt back, cocking the gun. Remember, a successful cocking of the dart will result in the chamber covering the dart in the window so that you can't see the top of the clip.4. Fire the jammed dart.5. Replace the clip.