TAKE THE TENSION OFF BY SECUREING A WRENCH ON THE NIB AT TOP OF TENSIONER . THERE ARE TWO HOLES TO PUT A FINE SCREWDRIVER . THAT WILL HOLD IT IN PLACE WHILE YOU ARE WORKING ON IT
The alternator on a Ford E150 van is replaced by loosing the retaining bolts, removing the belt, disconnecting the wiring harness, and unbolting the alternator. A replacement alternator can then be put into place and reattached.
your fan belt may be connected to your alternator if so loosen alternator romove belt put new one on and pull alternator back until proper tension is aqquired tighten
Loosen the alternator tensioner bolt. The alternator belt will become loose. Remove the alternator belt. Put the new alternator belt on and reverse the process.
Yes.
Loosen the tensioner bolt on your alternator. Slide the alternator to the left. Remove the alternator belt. Put the new alternator belt on and tighten the tensioner bolt.
You will need to loosen the alternator belt with the tensioner pulley. When the tensioner pulley is loose the alternator belt will become loose. Put the new alternator belt on and tighten the tensioner pulley.
You will need to loosen the tensioner pulley. Put the alternator belt on. Push the tensioner pulley to the left until the alternator belt is tight. Tighten down the tensioner pulley.
Is the timing belt on a j30 infinity run the alternator
What bolts to loosen to put alernator belt on and how to put it on when a/c belt is on.
You can remove your 1993 Mitsubishi alternator belt by loosening the tensioner pulley. Slide the tensioner pulley to the right. The alternator belt will become loose and can be removed. Reverse the process to put the new alternator belt on.
Disconnect the 1982 Regal alternator. Loosen the alternator bolts and slide to release belt tension. Put new belt on ( you may have to remove other belts to gain access) and pull the alternator sideways to put medium tension on the belt while tightening the bolts. Reconnect the battery.
Relax belt by holding automatic belt tensioner with large socket and/or breaker bar