Can you install a deck over an inground pool?

Answer 1

Absolutely! We finished such an installation last summer and love it! Some considerations:

1) Be sure that your pool + deck dimensions will fit on the slope. The slope is often visually deceiving. Use a string and string level to stake out a horizontal line out over the slope and measure at the proposed down hill side of the pool for appropriate depth. Check this every few feet across your proposed pool area, as you will need to excavate ONLY to make a flat spot for the pool. Do not try to build up a level spot with fill. It will settle taking your pool with it! Also avoid placing your pool in a gully swale or drainage path, anywhere that channels water runoff.

2) Spray paint excavation lines 2-3 ft wider than the pool dimension to guide the dig.

3) DIG! A bobcat will make short order of your work.

4) Slope the upside of you excavation so that fill does not wash in upagaist the pool sides. We chose to cover the up hill side of the dig with landscape fabric to minimize washing of the soil.

5) Be sure your excevation is level, and that soil will not build up against pool walls.

6) Assemle the pool and Deck it, spanning from pool to ground level.

Answer 2

You can, visit www.deckover.com for an idea how, good luck.

This is a more difficult task than most realize. I have seen a lot of decks that were not properly built by so called "handy men". It's a pretty expensive experiment. You should really call Deckover. I've seen their work and it's pretty ingenious. They have covered all the problems that you might run into and are very professional.

When building a deck, the level of difficulty dramatically increases when you try to fit it inside a circular object. Most people will build an unsafe structure. So..... Good Luck!

Answer 3

You have to form work for the concrete on the side of the pool that sticks up out of the ground i.e. on the lower side of the lot.