Number one rule with refrigerant is, "If you have to add it, you have a leak." Auto refrigerant is sold in pressurized cans and, to my knowledge, requires certification to purchase and use. There will be a port with a cap on the line coming out of the top of the compressor. Screwing the can on will fill it, but overcharging will reduce the cooling power of the refrigerant.
You can buy it at any auto store. Even Walmart carries it. No need for a cert.
Go look at the answer that was posted for, "How do I put freon in a 1996 Mercury Villager?" This answer is most likely what you are looking for.
Refrigerant is added through the low pressure service port.
Connect a Freon gauge and Freon to the low side ac port. With the engine running and ac on high, open the valve and allow Freon to flow until the gauge reads full.
4.5 quarts with new oil filter
where do you put freon in on a 2000 gmc jimmy
i just put some 24" sony steros in my alero
i have a 4cylndr 99 old alero gx and it requires 5w30
never use it
A 1982 Oldsmobile was built to use R12, it would need retrofitted to R134a..
Yes
If you are referring to the AC system, then it is R-34,which you can pick up at most parts stores. One can will do but you will need one with a valve. Also, when you go to put it into the line, make sure it is the low pressure line so it ingests the refrigerant.
The 1992 Oldsmobile Cutlass Supreme uses R12 freon and needs 36 ounces. R12 is no longer being made, but is still being recycled and is still available through online auctions.
How do I take the back panel off
7 qts refill for auto trans 13 qts if you drain the torque converter too
In the 2000 Ford Taurus the low side freon port when facing the car from the front is on the left side fire wall. It may have a blue or black cap.