You Tube has videos for nearly anything. I have had great success as I own a 775r.
Sae 30w
String got under shaft
you would take off the cover and expose the recoil spring/shaft then detach the string and put the new one on
To put a line under some text.To put a line under some text.To put a line under some text.To put a line under some text.To put a line under some text.To put a line under some text.To put a line under some text.To put a line under some text.To put a line under some text.To put a line under some text.To put a line under some text.
Take the old line to the repair shop and buy new, pull the line out of the tank, get the fuel filter out of the tank. Cut the end of the new fuel line to a 45 degree angle and start putting it in the hole in the fuel tank. Grab the line thru the filler neck (use needle nose pliers) and pull about 5-6" of the line thru, cut the 45 degree angle off and make it 90 degrees and attach the fuel filter. Put all the line you pulled thru into the tank. Cut the remainder of the line to length and attach it to the carburetor.
Unplug the weedeater from electrical source. Turn the weedeater upside down and remove the black knob on the bottom. If the black knob won't come off you can carefully use a large pipe wrench and turn it counter clockwise to loosen it. Be careful not to lose the slotted metal ring between the black knob and the trimmer spool. Remove the spool and clean it off. There is an arrow showing you where to insert the string. Start pushing the line into the spool going counter clock wise. Be sure to use only .065 ROUND string. Put the spool back on the spindle yellow side up. Hold the slotted metal ring with the slot facing up. Insert the string into the bottom of the ring and put the ring in the recessed circle on the spool, (yellow side). Pull the string over the slot and hold it there. Screw the black knob back onto the spindle, making sure the string is in the slot on the metal ring. Tighten the knob. You are now ready to go.
Put 7.55 on the first line. Put x52 on the second line. Put 1510 on the third line. Put 37750 on the fourth line. Put 392.60 on the fifth line. Underscore the second and fourth lines.
Put 7.55 on the first line. Put x52 on the second line. Put 1510 on the third line. Put 37750 on the fourth line. Put 392.60 on the fifth line. Underscore the second and fourth lines.
Put It on the Line was created on 2005-11-18.
My friend at a lawn mower repair shop provided me with this PDF manual he said it covers the weedeater 22 inch mower I uploaded it here http://www.freshautos.com/weedeater22inchmanual.pdf I also put the parts list up here http://www.freshautos.com/weedeater22inchpartslist.pdf that may come in handy if you need to order parts
To put on a macro line, put the rupper line into the silver fitting. Make sure it is sungly in otherwise you risk a leak. If you have a steel line you simply screw it in.
1. put the carb into start position 2. Pull cord 3.put into run position 4. pull throttle. BTW you might want to ad gas! and if you still dont know how to run this then WOW your special