The DPF light on a Mini Cooper can be reset by attaching an ODBII code reader to the vehicle. It will allow all errors and lights to be turned off until another problem is detected.
dis-connect the negative battery cable for a few minutes then re-connect. this will re-set the service engine light but be forwarned , the light wwill come bacck on eventially if there is a problem!!!=
Place key in ignition but do not start vehicle. Move the key to the "on" position illuminating the odometer. Depress the mileage re-set button - continuing to keep the re-set switch depressed - turn off the iginition. KEEP THE RE-SET SWITCH DEPRESSED and after a few seconds turn the ignition back on. Still keeping the re-set switch depressed wait a few seconds and the light should turn off.
{your car requires a service) when the mechanic has completed the work he will re set your warning light.
What can be the problem with the overdrive light flashing on and off?
Add oil to engine until level correct on stick.
The corect and only real way: Have the car scanned, this will tell you what is wrong. Repair the fault. Have the car scanned and re-set. If you re-set the system without repair it will just come back on.
A scan tool is required to clear the check engine light. If the failure is not repaired, the light will return.
You don't... You fix the problem and the it goes out all on it's own...
Turn the dial............ re-re.
If the purge valve was causing the fault, the light may go out. If it was and it didn't you may need to re-set the system.
Vehicle needs to go onto diagnostics. Fault must be rectified before the code can be reset. Once the code is re set, the light will extinguish.
First off, its a chain, NOT a belt, and you DONT change it unless it breaks. You can SET the timing, but you dont have to change the chain. You need a timing light to re-set it if its off. Its like a strobe light.