Want this question answered?
corroded cable catch not returning
Reach up from under car hold cable and push toward bonnet catch
It will cost you a few hunderd quid to get this sorted by renault... or get some handy person to get the bonnet open, and using a cable tie connected to the passenger side bonnet release, connect said cable tie, and let the end poke out from the bonnet. This then becomes your new bonnet release. Any eagle eyed person with the knowledge will be able to open your bonnet from the outside. So do be wary of this solution. But it only costs a few pence for a cable tie vs a few hunderd quid from reno.
get a pair of long nose pliers, to the left of the bonnet lock (as you look at it) is the bonney cable, insert the pliers through the grill to get hold of the cable and push it to your right, towards the lock and the bonnet should pop. the just release the catch and it should open.
Hi you dont need to explain your whole situation just ask the question, Bye
To reset a Jaguar S service indicator, unplug the positive cable on the battery for about 5 minutes. Then, reconnect the battery. The service light should not stay on when the vehicle is started.
The bonnet release cable breaking is a common problem in the Ford BA Falcon, and if done incorrectly removing or replacing it can result in having to replace the fuse block as well. It is best to have this done by a qualified mechanic.
AnswerThe Bonnet is called the Hood in the U.S. Pull the lever inside the car, on drivers side. Then release the hood (bonnet) with the lever located in the front grille.If the level is slack - it points to a snapped bonnet release cable.To open the bonnet in this situation (on a Fiat Punto), you'll need to get under the car.I jacked up the car, placed it on a stand on the passenger side, and reached up underneath. I've videoed it - quick to do once you see it.http://bit.ly/Yh1dQ9TAG: Fiat Punto, Bonnet Cable, Snapped Bonnet Cable
Hi climb under the front of the car with a pair of pliers, reach up and pull the release.
you will find the bonnet release on the right (drivers side) on the lower wing panel under the dashboard.hope this helpsIf the level is slack, then the bonnet release cable has snapped.You'll have to jack the car up, and access / pull the cable from underneath.I jacked up the car, placed it on a stand on the passenger side, and reached up underneath.I've videoed it - quick to do once you see it.http://bit.ly/Yh1dQ9Read more:Where_is_the_bonnet_release_on_a_Fiat_Punto
call a mechanic
The bonnet catch is in the foot well on the passenger side near the door but high up. Pull it to release the catch then put your fingers between the gap of the slightly open bonnet lid in the middle. You will find a small plate that needs to pushed up ton release the lid.