You'll have to first buy new fluid the seals an a gasket... then jack the truck up take the rear tires off.. then remove the differential cover an unhook the driveshaft.. there is a pin inside the differential which is held in by a bolt.. remove that bolt an slide out the pin. then push the axles in an take out the c clips that hold them in.. That will allow you to slide the axles outan replace the seals.. then all ya gotta do is put it back together
1988 to 1999 are all the same.
there is not one
If same size, yes.
Its on the front of the engine. The pulley with the fan.
No
no, dodge didn't build it with one
in fuse box under the hood
If any, they will be on the ball joints and tie rods.
I believe its 7,950 lbs. I have a 2000 Dodge Ram 1500 and that is its towing capactiy. I would imagine its the same for a 1999. Depends what size engine you have.
it will only work if you take apart the hub caps, engine, quadreceps and antibypeds
Go to LMC.com,they have what you want. Junkyards and the dealer also.
Not directly.Not directly.