There is a lever above the parking break that you pull by hand.
If it doesn't have a release handle, you step down on the parking brake pedal one more time to release it.
Right below the parking brake release.
How do you adjust parking brake on 2004 chev 2500 series 4x4
# To gain access to the parking brake adjuster raise the rear and support the truck # Remove the rubber plug from the brake backing plate and using a screwdriver or brake adjusting tool turn the adjusting screw star wheel until the parking brake shoe start to drag as the disc is turned then back off the star wheel until the shoes dont drag
You dont
55
It is behind the disk brake rotor.
I don't know about Silverado trucks but all of the emergency (parking) brakes I'm familiar with use the brake cable to "pull" and hold the brake against the drum (or disk), so if the cable breaks you simply cannot apply the emergency brake. That is, it is automatically released if the the cable breaks.
parking brake on.
Bad switch. Easy fix- cheap part!
You have to take off the caliper and rotor and adjust the brake with a flat head screwdriver
if your van has rear drum brakes, adjust them up until there is a slight drag on the brakes. this usually does the trick to tighten up the parking brake.