I can't remember what a '97 Taurus has for an emergency brake. The ones with a handle (usually between the seats) You pull a little bit of strain on it then press the button on the end and push it down. The ones with a pedal, You push it down all the way and it should release. If neither work your brake could be stuck on and you would have to take the wheels apart to fix it.
Fix the emergency brake
Your GMC Suburban emergency brake release cable is held in place with a swivel nut on each end of the cable. Loosen the swivel nut to remove the cable. Reverse the process to install the new emergency brake release cable.
If the cable is broken and parking/emergency brake is still ON, then they are rusted in place ! - Your emergency brake system needs urgent work.
Cable is rusted, bent, or hanging for some reason. Could also be the parking brake needs adjustment. The brake is not fully releasing.
The emergency brake cable is held in place with swivel nuts on each end of the cable. Turn the swivel nuts to the left. The emergency brake cable will come off.
?need to replace the cable to a 1979 buick regal, the emergency release mechanism wire broke. Don't know how to release the brake?
Jack up, remove rear wheel, remove emergency brake cable, loosen bleeder valve and bleed as normal.
You can adjust your 1989 Chevy Corvette emergency brake into different ways. The emergency brake will have an adjustment bolt on the brake pad. The emergency brake cable can be adjusted to shorten or lengthen the cable.
I don't know about Silverado trucks but all of the emergency (parking) brakes I'm familiar with use the brake cable to "pull" and hold the brake against the drum (or disk), so if the cable breaks you simply cannot apply the emergency brake. That is, it is automatically released if the the cable breaks.
Front emergency brake? Do you mean a frozen cable? If front brake is locked may be a frozen caliper Emergency brake tied to rear brakes only
The 1996 Toyota Tercel brake cable runs from the emergency brake lever to the rear wheel. The emergency brake is on the passenger side rear wheel.
The emergency brake cable is connected to the brake shoe on the rear brakes. You can adjust the emergency brake by loosening or tightening the nut on the end of the cable.