Access the emergency fuel shut-off switch (aka inertia switch) located behind the passenger side kick panel and press the red button on it to de-activate the fuel pump. Crank the engine to relieve the fuel pressure in the line. Do you whatever it is you need to do and then press the red button on the inertia switch again to activate the fuel pump.
My Ford Ranger is a 1998 4.0 ltr V6.
What is the timing for a 1998 ford ranger 2.5l
No, the cab was lengthened in the 1998 model year.
what is the axle gear ratio for a 1998 ford ranger 4x4 4.0l?
need locations of steering column brackets on a 1998 ford ranger
on my 1994 ford ranger, i just removed the holding rings on each end of the in and out line very slowly until the pressure was released. you will get a bit of gas spray but nothing serious. hope this helps. fordman.
The wheelbase of the 1998 Ford Ranger Supercab is ( 125.7 inches ) according to the owners manual
Bank 1 is the passenger side of your 4.0 liter V6 in a 1998 Ford Ranger
On a 1998 Ford Ranger, the fuel filter is typically located along the frame rail on the driver's side, near the fuel tank. It can be identified as a cylindrical canister and is usually mounted to a bracket. To access it, you may need to raise the vehicle for better visibility. Always ensure to relieve fuel system pressure before attempting to replace the filter.
98 ranger and what else?
tire size for 1998 2dr ford ranger is?
5W30