A brake calliper for a 1986 Ford Ranger would be likely to cost between $20 and $40, depending on where you source it.
Yes it is fine to use 10W-40 oil
The sensor is intergrated into the door latch. If it is not working (and the door chime stays on) spray it with WD 40. This almost always works.
I'm not a mechanic / technician but I BELIEVE that is ( 40 to 60 PSI at 2,000 RPM ) for the oil pressure on a 3.0 liter V6 engine in a Ford Ranger
A replacement part for a 2002 Ford Ranger oil pan gasket will cost a price close to $40. The part can be purchased from a auto parts store.
The 1999 Ford Ranger 3.0 liter water pump bolt torque specifications are 40 pounds. You do not want to torque the bolts to hard or they will break.
its mounted under the hood on the driver side fender
The fuel pressure on a 1998 Ford Escort should be between 40 and 60 psi at idle and not drop below 35psi under acceleration.
yes 2002 and later 30L are the only ones not equipped with an egr valve
The polaris ranger speeds are, 500engine,40. 700engine,40-50. 800engine,55mph.
As I understand it, Bank 2 should indicate driver side, and sensor 1 should be the sensor closest to the front of the car, upstream of the catalytic converter. The safest way to find out for sure, is to find an honest Ford service technician and ask! Good luck
you have to remove the dash to get to it, it is well worth it to pay someone else to do it, it took me 2 days to do mine