To remove the seats from a 1995 Corvette, you will need to remove the front and rear nuts from the seat frame studs. You will?æalso need to remove the lug wrench that is attached to the seat frame studs.
== ==
Remove four bolts. Lift it out.
== ==
Should be a bolt in each corner of the seat and disconnect wiring harness
Just push back on the seat and lift.
look around the bottom of the seat their should be bolts leading through the floor board take those out (their should be 4 of them) and just remove the seat.
Remove the positive cable from your 1995 Chevy Corvette battery. Remove the cables from the front of your old starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
Four bolts hold the seats in. Pull the seat all the way forward & remove the two bolts behind the seat (one each side). Push the seat all the way back & remove the front bolts. The seat should come right out (mine did!).
If you are talking about removing the entire seat ther are 4 bolts on the undercarraige that fasten it. One side is bolt from bottom.
Begin by training the fuel from your 1995 Chevrolet Corvette fuel tank. Remove the fuel line. Remove the fuel filter retaining plate. Remove the fuel filter retaining bolts. Reverse the process to install the new fuel filter.
Not necessarily, but it makes to job allot easier.
what is the process for installing new seat covers in a 1977 chevrolet corvette