When you open the back hatch on the vehicle you should see 2 rubber plugs on the edge of the tail light cover, use a flat head screwdriver to pry the both the rubber plugs all the way up. Surprise, they are what holds the cover in place! No screws or bolts! Replace the light bulb and put the cover back into place, push the plugs back down to secure the cover, and you're done.
If you do the service tire system light will always be on.
Just pull it out. It simply pops in place.
The Dodge Caravan brake light fuse can be found in the fuse box. The fuse box is located in the engine compartment. The location of the fuse can be found on the inside cover of the fuse box.
The tail light is an assembly. The lens is not removable. To replace a bulb you remove the assembly by opening the liftgate, removing two fasteners, and pulling the light rearward.
Have a look at this link: http://www.wikihow.com/Replace-a-Tail-Light-on-a-Dodge-Grand-Caravan
you need to replace your fan relay switch, in my 2000 caravan i had to remove thel left head light to reach it
remove tail light, remove burnt bulb, replace burnt bulb, test if it works, then put tail light back on....
The map light on a 2004 Dodge Grand Caravan SXT is changed gently prying the edge of the cover to reveal the bulb. The bulb can then be popped out and a new bulb installed.
yes
There are screws under the fascia and matting in the trunk.
From outside,take a screws out to get light assembly loose and remove light socket from back of assembly and channge your light bulb,then put it back.
See sources and related links below to lookup Dodge Caravan brake light lamp part numbers by vehicle year.