there are two flat bolt on top the the steering shaft that hold the lock in place but they are one time bolts so to remove them you either have to chisel a slot in them to use a flat head or you have to drill out the bolt the new lock assembly with come with new bolt with heads they break off once they are fully tight
no the switch can be independly remove from the back side of the ignition lock
you have to remove the lock clinder
The ignition lock switch is found under the steering column on a 2004 Honda Civic. Remove the steering column and ignition switch. Loosen the mounting screws that hold the cylinder in place. Pull and replace the lock cylinder.
1996 rodeo- how to remove key from lock ignition?
Pop door panel to get access to clip behind it.
very carefully reme it and remove plug and reverse the pro cesure
Remove the retaining ring, from the top of your 1997 Ford Astro ignition lock cylinder. Remove the wiring harness from the back of the ignition lock cylinder.
Remove the retaining ring from the top of your 2000 Mercedes-Benz ignition lock cylinder. Slide the ignition lock cylinder out and remove the wiring harness.
How do you open your 2006 honda accord trunk when the emergency lock will not work and the remote doesn't open it?
with your cox
my 93 Honda has a lock on it to fold down rear seats look ,look between rear speaks towards the front, ignition key should unlock seats
Remove the retaining ring at the top of your Chevy S 10 ignition lock cylinder. Slide the ignition lock cylinder out. Remove the wiring harness from the back of the ignition lock cylinder. Reverse the process to install the new ignition lock cylinder.