You must remove the tail lamp assembly to replace the bulbs, Open the liftgate, there are 2 screws on the inside edge of the light, with the 2 screws removed pull the tight straight back to remove it. There are 2 locking pins on the right side of the light which may take some effort to release.
Source: http://repairpal.com/remove-tail-light-cover-424
Open trunk and remove screws that secure light assembly to car. Pull assembly straight back to remove from car. Remove the dead light and replace with proper new light. Install in reverse order of removal.
Open the trunk and remove the nuts holding the assembly in place. With nuts removed the tail light assembly will come out the back then you can remove the light socket to replace the bulb.
remove the screws holding the ring around the light then remove the light.
Remove the fasteners and electrical connection from behind the assembly and slide the assembly out the front.
step1. open the hood and remove the hex nut holding the outer light portion in place. step2. remove the hex nuts above the light assembly step3. remove the hex nut to the side of the lights to allow them to lean forward step4. allow light assembly to move forward and twist the light to remove from the assembly step5. replace bulb step 6. replace light assembly and all hex nuts
Remove carpet inside trunk that covers tail ligh assembly, then unbolt tail light assembly, remove the assembly and bulb fixture of the bulb you want to replace, replace bulb and re-install in reverse order.
drop the tailgate on side of bed where tailgate closes are couple of screws. thses hold the light assembly in bed. remove thse ,then remove light assembly light bulb is the able to be removed from back of assembly
You need to remove the top head light by unscrewing two bolts on top if the lighting assembly. once the head light is out of the way you pull out the turn signal lamp and replace it.
You need a star point screwdriver. Remove the 2 screws pull out light assembly. Remove the light socket from housing and replace bulb. replace in reverse order. 5 minutes.
remove the stock tail light assembly. the bolts will be either in the tailgate area or you will have to remove the interior panel to access them.
To replace the brake light bulb you need to remove the whole light assembly. Once removed the change is simple.
Remove the nuts so you can take the assembly off. Replace the assembly with the new light bulbs and socket it together. Screw the nuts back on to secure it.