Want this question answered?
Triton Digital was created in 2006.
Disconnect the car battery cable, remove the spark plug cables, remove the spark plug boots, and remove the old spark plugs. Next, put in the new spark plugs, replace the boots and cables and reconnect the battery cables.
The 2006 Toyota Tacoma V-6 engine spark plugs can be removed with a 5/8 deep well socket. Turn the socket to the left to remove the spark plugs.
When changing the spark plugs on a 2006 Toyota Tacoma make sure the vehicle is off. Use a spark plug socket and pull the spark plug wires. Remove the old spark plugs and properly space and install the new parts.
remove coil packs from valve cover. they are underneath.
You have to remove the intake plenum. It just unbolts.
You must remove the upper manifold to access the spark plugs. Each plug has an individual coil attached; you must remove the bolt holding the coil and boot in place.
Consult the 2006 Vitara owner's manual to change spark plugs and fix the throttle. Remove the spark plug covers by pulling the caps. Use a spark plug socket to remove the old spark plugs. Use the same tool to place the new spark plugs. Replace the spark plug caps. Locate the throttle compartment under the hood. Use a wrench to loosen the nut around attached to the throttle. Adjusting this nut and cable to the throttle will in turn change the amount of RPMs.
Out of This Spark was created in 2006.
Under the dust cover. Remove the 4 bolts that are covering it.
If you remove the windshield wipers and the plastic cowl you can easily get to the back 3
how do i change the spark plugs on a 2006 hyundai accent