(1) Remove the air filter and housing (2) Loosen the cable bracket (3) Remove the throttle and choke cables from the carburetor (4) Remove the governor spring from the carburetor (5) Remove the two bolts that fasten the carburetor to the engine. CAUTION: Do not stretch or bend the governor spring while removing or re-installing.
No, never oil the carburetor linkage. Clean the linkage throughly with carburetor cleaner. If you oil the linkage it will become clogged with dust which the oil will attract.
48oz
190cc
what plug size fits a 3.75 briggs and stratton,and a 19.5 briggs engine and what is the gap. thank you
SAE30
9
It is a 2-cycle 4HP Briggs motor.
You need to either adjust your carburetor richer or leaner while at full throttle.
A Briggs and Stratton 17.5 horsepower engine can use any type of small engine motor oil. A heavy duty motor oil is recommended.
For a Briggs and Stratton motor 3.5 motor used straight gas and oil in the crank-case, there is no ratio.
13.6