How do you remove a door panel on a 93 Ford Probe?

Answer 1

Second generation ? = Remove the screw on the rear top and the plastic push-pin. Remove the screw in the seat of the handle for opening the door, look at the rear end of the handle and you see a small plastic clip wich you will have to press with your fingers so it will snap away from the rod and then lift the handle out. Remove the 2 plastic covers on the inside handle in the middle of the door if it's the passengers side and unscrew the 2 screws. Remove the screw that is in the front end of the lower compartment, could be hard to see so feel for it. Remove the screw in the middle under the fabric in the little side pocket. Feel with your hands so that your fingers go between the rubber lining and the door panel.

The panel is hold in place by plastic snaplocks, pull it towards you and listen for the "pops". When it is lose all the way grab it by the bottom rim and press it lightly upwards so that it unhooks itself from the door near the window. BEFORE you take it completely of you have to unhook the 2 plastic connectors for the side mirror and doorlocks etc.