Want this question answered?
it will turn into a electrail enegry
The Pencil lead
The energy to produce the light stops and the light stops.
If you unscrewed any bulb in the circuit it would turn all of the bulbs off.
It stops flowing throught the bulb.
Remove the turn signal light bulb connector. Take hold of the light bulb, push in and turn at the same time, to remove the light bulb. Reverse the process to install the new light bulb.
Take hold of the turn signal light bald connector, push in and turn. The light bulb connector will come out with the light bulb. Remove the light bulb the same way you remove the connector. Reverse the process to install the new light bulb.
By popping the light cover off and then figure out in your owners manuel how to remove the the bulb.
Remove the shifting console cover. Remove the shifting light retaining ring. Push the light bulb in and turn at the same time. The light bulb will come out. Reverse the process install the new light bulb.
Open the trunk, find your housing screws, remove these, remove the housing, remove the bulb socket, remove your light bulb. To reinstall, just reverse these procedurees.
Remove the light bulb connector from the light. Take hold of the light bulb, push in and turn at the same time. The light bulb will come out. Reverse the process to install the new light bulb.
To change the license plate light on a Pontiac Sunfire, first remove the cover over the bulb with a small screwdriver. Gently push on the bulb and turn 1/4 turn to remove the old bulb. Insert the new bulb and snap in the cover.
TUrn the light off and let the bulb cool for a short while. Then just twist it counterclockwise (to the left) to remove it.
Remove two screws holding tail light assembly. Pull or Pry out tail light assembly. Locate center wire plug harness, turn to remove, pull out bulb, push new bulb in.
remove all the screws from the tail light asembly turn bulb to remove put electrical contact greas on new bulb install new bulb replace screws
Remove the long black plastic trim on the trunk rail. Remove the three nuts holding on the trail light assembly, and pull out. Remove the bad bulb and reinstall. If it is the bulb in the trunk lid, all you have to do is remove the padding and change the bulb.
remove the 2 t15 screws in the taillight remove the assy. turn bulb socket out and replace