0
1. get a manual because you will need it.
2. disconnect the battery.
3. disconnect the fuel lines.
4. disconnect the cooling system.
5. remove the exhaust system (makes more room and things more accessible.)
6. locate motor and transmission mounts.
7. remove the intake system so that you can bolt the cherry picker to the maniford.
8. take photos of things so you have a real life example of the way that things were under YOUR hood.
What else can I help you with?
How do you remove radiator from gmc jimmy?
How to remove a bad radiator from a 1992 GMC jimmy 4x44-door,v6 engine?....Thank you :)
How do you remove a powersteering pump. Pulley in a 1997gmc k2500?
That requires a power steering pulley PULLER. Some parts stores will lone are rent it to you. It also requires a special tool to press it back on.
How do you reset or turn off the check engine light on a 1997 GMC Jimmy?
just remove the battery cable for about 5min then put it back. that should reset the check engine light.
Reasons why a gas gauge do not work on a 1997gmc sonoma?
sending unit bad on top of fuel tank
Where is the drain oil plug on a1997 jimmy blazer?
It would be at the lowest point of the engine oil pan. It should take a 15mm wrench to remove.
How hard is it to change the heater blower fan in a 1994 GMC Jimmy?
Simple, Passenger side engine caomparment on the fire wall. Remove the cover (its kinda round) remove and bolt in new motor.
Where is the thermostat on a 2005 gmc jimmy?
On a 2005 GMC Jimmy, the thermostat is located in the engine compartment, typically near the engine's water outlet. To access it, you usually need to remove the upper radiator hose that connects to the thermostat housing. It is often situated on the driver’s side of the engine, near the intake manifold. Be sure to allow the engine to cool before attempting to locate or replace the thermostat.
Where is the thermostate on a 1998 jimmy?
On a 1998 GMC Jimmy, the thermostat is located in the engine compartment, typically near the engine block where the upper radiator hose connects to the engine. To access it, you'll need to remove the upper radiator hose and the thermostat housing, which is usually secured with bolts. Once removed, you can replace the thermostat as needed. Always ensure the engine is cool before attempting to service the thermostat.
Where is the oil cap on a 98 gmc jimmy?
On a 1998 GMC Jimmy, the oil cap is located on the engine's valve cover, typically at the top of the engine. It is usually marked with the word "Oil" or an oil can symbol. To access it, simply look for a round cap that can be twisted off, allowing you to add oil as needed. Ensure the engine is off and cool before attempting to remove the cap.
What v8 engine can replace 2002 GMC Jimmy 6 cylinders?
The v8 engine 2002 GMC Jimmy 6 cylinders can be replaced with the GM Vortec 4200 straight-6 engine.
How do you remove the crankshaft in a dodge stratus 2.7 L?
Remove the engine, place on an engine stand. Remove heads, oil pan, pistons, main caps and remove the crank.Remove the engine, place on an engine stand. Remove heads, oil pan, pistons, main caps and remove the crank.
Do you remove the evaporator core from under the dash or from the engine compartment in a 1983 GMC Jimmy?
Most def the engine compartment .. possibly some inside retainers but most likely not..i would post a design of the evap core, blower fan, and cover.
