See these instructions
http://integrationsolutions.net/AUX_INPUT/BLITZSAFE/HON_DMXV2X/RRI/ODYSSEY_replace_rri.html
how do i remove the radio on the 96 Honda odyssey
If you are referring to the factory supplied radio, it is not a 'component' type radio. It must be removed from the dash and dis-assembled.
To remove the radio from a 1995 Honda Odyssey, start by disconnecting the negative battery cable to avoid electrical issues. Next, carefully pry off the trim panel surrounding the radio using a flathead screwdriver or trim removal tool. Once the trim is off, remove the screws securing the radio, then slide it out of the dashboard and disconnect the wiring harness and antenna. After that, you can replace or service the radio as needed.
how do i get a code for my 2007 honda odyssey 2007 if i have the serial for the radio
Visit the site, below in the related links and sources for more information and help.
To install a factory radio in a 2007 Honda S2000, first, disconnect the negative battery terminal to ensure safety. Then, carefully remove the center console trim using a trim removal tool to access the radio. Unscrew the existing radio, disconnect the wiring harness and antenna, and then connect the new factory radio by reversing the disconnection process. Finally, secure the radio, reattach the trim, and reconnect the battery.
Honda radioremoving Honda radio installing sony radio
Call your Honda dealer be ready to show prof of ownership and get the serial # off the back of your radio.
Factory reset for a radio in a 1999 Honda Accord can be done by a dealership. The requirements from the dealership to have this done is proof of vehicle ownership.
no there are no factory radio that has RCA.s except the new tiburon with factory kenwoods in them
To remove the factory-installed radio from a 2002 Honda Civic, start by disconnecting the negative battery terminal to ensure safety. Use a flathead screwdriver or a panel removal tool to carefully pry off the trim panel surrounding the radio. Once the trim is removed, unscrew the radio mounting screws, then gently pull the radio out from the dash. Finally, disconnect the wiring harness and antenna cable from the back of the radio to complete the removal.
Answer: I'm looking in the Chilton repair manual (previous generation Odyssey) and it says to: * remove steering column covers * CAREFULLY pry off center panel (trim around the stereo) * remove two bolts holding radio bracket * pull out bracket (disconnect electrical connectors as you go) * remove 4 bolts holding CD player to bracket * ta-da Short of that go to your local auto parts store and get a Chiltons repair manual which will walk you through the process step by step with pictures.