0
one bolt at a time
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What parts do you need to replace a throttle position sensor?
You need only the new tps. If your asking how to remove than you need a 10 mm socket to remove the engine cover and a Screwdriver (can be Phillips or flathead) to remove the sensor. Also pliers to remove the clip holding the plug on the sensor
How do you remove a 350 Chevy engine?
First you need to make sure u have the exauhst pipes diconnected from the stock manifolds (or if you have headers). the you need a engine hoist, tractor with a loader, or a forklift. then you can wrap a chain around it and pull the engine out. and i forgot you have to everything unhooked or taken off.
How do you remove the top of a lightsaber?
With a hammer and a flathead screwdriver. I wonder how to open one of those 1999 lightsabers though.
How do you remove a door panel on 1996 Sedan Deville?
front/rear 1. Remove the end plate covers on the pull strap(tiny flathead to avoid breaking) 2. unscrew screws with regular size flathead or appropriate size Phillips star 3. remove plate behind chrome pull handle(tiny flathead again) 4. remove entire door lock plate with pull strap. 5. remove door panel by pushing up and out towards you *note* it is not necessary to remove window switch/seat plate ...all wires can be disconnected from rear once door panel is off door
Where is the intake manifold runner bank 1 on a 2006 ford escape hybrid?
in the engine. you must use a number 2 flathead screwdriver to loosen the driveshaft to get to it. Remember to remove all of the wheels first! NOTE: do not adjust the tension of the chassis.
Why should you remove the Keys from the forklift after you have finished using it?
So that unauthorised people cannot use it.
How does one remove a door handle on a 2002 Honda Civic?
Remove all screws and use a flathead screwdriver to pop it out of the plastic sockets. Be careful, they break easily.
How do you remove the hubcaps on a 1992 Buick roadmaster?
Slow insert a flathead screw driver in the slot provided and push, hubcap will pop out
How do you remove the crankshaft in a dodge stratus 2.7 L?
Remove the engine, place on an engine stand. Remove heads, oil pan, pistons, main caps and remove the crank.Remove the engine, place on an engine stand. Remove heads, oil pan, pistons, main caps and remove the crank.
Where is Audi a4 1997 fuse box?
on the drivers side of the dash, between door panel and dash under a panel you remove with a flathead
How do you remove the dome light cover of a 2001 regular wheel base Pontiac Montana?
My 98 gets pried off with a flathead screwdriver.
How do you remove the grill from a 1998 Chevy pickup?
use a flathead screw driver to take the center of the pushin clips out and pull the push in clips out
