You Should take to a Professioan to do this job!!!!!!! THIS IS THE MOST DANGERUOS things to do on ANY vehicle, Most of all if you are doing it on your back. This may save yours or someone eles's LIFE or HOME!!!!!!!!! ScrewyStewy says: With a little caution its no problem. But agreed, If you have NO repair ability then please don't attempt this. Let the Van sit for a day to reduce most of the fuel line pressure then dissconect the line with the handy fuel line tool you just purchased at ANY parts store.
an ordinary crescent wrench will work just fine
Drain the fuel from the fuel tank. Remove the fuel line from the fuel filter. Remove the fuel filter plate. Remove the fuel filter retaining bolts. Reverse the process to install the new fuel filter.
The fuel filter, in a 2008 Ford fusion, is located inside of the fuel tank. Drain the fuel from the fuel tank. Remove the fuel filter plate. The fuel filter will slide out. Reverse the process to install the new fuel filter.
passinger side under floorpan bu jack point coverd with a steel plate follow the lines to plate remove plate to access fuel filter
The filter is on the carburetor ,the fuel line from the fuel pump connects to it. Remove the fuel line , using a wrench on the filter as well to keep it from turning , then remove the filter (steel) from the carburetor .
screwdriver
To remove the fuel filter on your 1997 Dodge Intrepid 3.5L, you will first need to locate it. The filter can be located on the right rear of the vehicle near the fuel line. Before removing the filter, depressurize your vehicle by following the steps in your manual. Once depressurized, you can then remove the filter using a wrench.
Located under the vehicle, in front of the fuel tank.
The best way is to remove the fuel filter and fill it with fuel.
The fuel filter is part of the fuel pump and pressure regulator assembly. You must remove the fuel tank to access it.
most ford truck fuel filters are on the frame , drivers side near the gas tank.
Drop the fuel tank or remove the bed.