answersLogoWhite
Headlights Tail and Brake Lights
Honda Accord
Honda Accord DX

How do you remove a headlight cover on a 1995 Honda Accord?

141516

Top Answer

User Avatar
Wiki User
2015-07-15 19:41:03
2015-07-15 19:41:03

The headlight is an assembly. To replace the headlight, you remove the bulb from the back side. It is a halogen bulb, so do not touch with bare hards before installing.

1

Related Questions

User Avatar

Hello...you don't, its one piece. hop this helps..

User Avatar

Headlight cover? The headlight can be removed by first removing the bumper cover. THen all the bolt that attach the headlight to the vehicle will be exposed. The "cover" is glued to the headlight housing.

User Avatar

This video on YouTube (see Related Links) will show you how to remove the front bumper cover from of a 2004-2007 Honda Accord.

User Avatar

remove the bumper, you will then see the bracket that holds the bottom of the light to the car. the rest is pretty self explanitory once the bumper cover is off

User Avatar

there are four screws on the coner of the cover just remove them and it comes offr

User Avatar

Follow the instruction in the link to remove the plastic cover http://www.installdr.com/InstallDocs/Honda/PDF/466053.pdf

User Avatar

What do you mean by headlight cover?What are you trying to do?JW

User Avatar

just remove the 3 bolts on top of the valve cover and lift it out,and theres the gasket.

User Avatar

How much does it cost parts and labor to replace a valve cover gasket on a 1990 Honda Accord 4door.

User Avatar

Are you entirely sure there _is_ a headlight cover?

User Avatar

The headlight lense is one piece. The cover is not removeable. To remove the lense, remove the two screws on the top and pull the headlight forward.

User Avatar

To change the high beam headlight on a 2008 Honda Goldwing you first have to remove the headlight housing by taking the six bolts off. After you remove the cover it is as simple as disconnecting the wiring and then pulling the light out.

User Avatar

Open Hood. Remove the cover from the headlight by prying up the keeper. Remove the metric 13 nuts holding the headlight in. Take out headlight and replace the bulb. Reinstall the headlight and reinstall headlight and cover.

User Avatar

Remove the bulb from the back side. The lense does not have to be removed.

User Avatar

hammer Come on! Right or left=handed? Male or female? I REALLY need to know.

User Avatar

Use the button on the dash to raise the headlights, remove the black plastic cover from around the headlight, unbolt the cover from the frame mechanism (IIRC).

User Avatar

Drain coolant and remove a/c and front gear cover then remove water pump then install back together

User Avatar

I'm not sure if this helps you but please check it out: http://www.installdr.com/InstallDocs/Honda/PDF/466053.pdf

User Avatar

You have to replace the entire headlight assembly not just the cover.

User Avatar

And your question is . . . . ??

User Avatar

The bumper has to come off! First remove the blinker lenses to access two bolts on either side, then in the engine compartment there are nuts on studs that have to be removed. (this proceedure is for taking headlight off car)

User Avatar

The computer (ecm) is under the passenger floor board under the carpet. will have to remove medal cover.

User Avatar

Remove the timing belt cover and inspect the belt or change it every 90K miles.

User Avatar

These are the same thing on this Accord with a single overhead cam. Also called the cylinder head cover.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.