It Simply Pull It Upwards and it will come right off...
Behind the passenger side head light. actually, it's below that headlight. take the headlight out and cut a 2" x" 2 square out of the thick plastic from the bottom. you'll see it.
For 1986 Vanagon: 1. Remove plastic grill - 5 screws. 2. Remove entire metal cage surrounding light - 4 screws. 3. Unplug highbeam and lowbeam lights. 4. The white plastic things sticking through 3 of the 4 holes can be tapped out gently with a hammer, hitting the white plastic from the front.
1) Open front hood. 2) Twist lowbeam connector from back of headlight casing. 3) Twist apart bulb from the connector. 4) Replace with new bulb. 5) Reverse order of above steps to finish.
Need to know the year, make and model.
REPLACE THE PASS SIDE HEADLIGHT
it is behind the passenger side headlight assembly. you will have to remove the headlight assembly to replace it.
To replace the passenger side headlight on a 2009 Buick LaCrosse, first, open the hood and locate the headlight assembly. Remove the plastic cover or any retaining clips to access the back of the headlight. Disconnect the wiring harness from the old bulb, then twist and remove the old bulb from the socket. Insert the new bulb (making sure not to touch the glass with your fingers), reconnect the wiring harness, and secure everything back in place before closing the hood.
To replace the passenger's side headlight bulb in a 2003 VW Beetle, first, open the hood and locate the headlight assembly. Remove the plastic cover or access panel behind the headlight to reach the bulb. Disconnect the electrical connector from the old bulb, then twist the bulb socket counterclockwise to remove it. Insert the new bulb, making sure not to touch the glass with your fingers, reconnect the electrical connector, and secure everything back in place.
replace passenger side low beam headlight
two bolts on the top of the plastic housing - lift the plastic headlight out and unscrew the headlight from the bottom of the light- replace the bulb and be sure to get the plastic pins in the right spot before you bolt the headlight back in place.
part and labor?
If you haven't already, replace the headlight. Chris