The headlight is an assembly. To replace the headlight, you remove the bulb from the back side. It is a halogen bulb, so do not touch with bare hards before installing.
Hello...you don't, its one piece. hop this helps..
This video on YouTube (see Related Links) will show you how to remove the front bumper cover from of a 2004-2007 Honda Accord.
Headlight cover? The headlight can be removed by first removing the bumper cover. THen all the bolt that attach the headlight to the vehicle will be exposed. The "cover" is glued to the headlight housing.
remove the bumper, you will then see the bracket that holds the bottom of the light to the car. the rest is pretty self explanitory once the bumper cover is off
It Simply Pull It Upwards and it will come right off...
there are four screws on the coner of the cover just remove them and it comes offr
Follow the instruction in the link to remove the plastic cover http://www.installdr.com/InstallDocs/Honda/PDF/466053.pdf
To change the headlight on a Honda Spree, first, remove the front cover by unscrewing the screws securing it in place. Once the cover is off, locate the headlight assembly and disconnect the wiring harness. Remove the old bulb by carefully pulling it out and replace it with a new one, making sure it’s securely in place. Finally, reconnect the wiring harness, reattach the front cover, and secure it with the screws.
To change the headlight bulb on a Honda Ridgeline, first, open the hood and locate the headlight assembly. Remove the cover or dust cap from the back of the headlight housing, then disconnect the electrical connector from the bulb. Twist the old bulb counterclockwise to remove it, and insert the new bulb by twisting it clockwise into the socket. Finally, reconnect the electrical connector and replace the cover to complete the installation.
just remove the 3 bolts on top of the valve cover and lift it out,and theres the gasket.
Installation of what?
How much does it cost parts and labor to replace a valve cover gasket on a 1990 Honda Accord 4door.