Very carefully drive it to the nearest service facility and pay them to perform this task and send out the core for refurbishing then reinstall the core into the car> if you dont have the skills or training you will only screw up the job.
On the 1987 El Camino the heater core is removed totaly from under the hood. The Chiltons Manual that you can get at any auto parts store for that year shows how to do it.
Reverse the process to install the new heater core. You will need to remove the passenger side kick plate in your 1976 Chevrolet El Camino. Remove the heater core water supply hoses. Remove the heater core retaining bolts.
Remove the water supply hoses from your 1987 Ford E1 50 heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
The heater core is located under the hood in the heater box where the blower motor is. Remove the heater hoses then the box can be unbolted and removed.
The 1978 Chevy El Camino heater core is located behind the passenger side kick plate. Remove the heater core water hoses. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
To remove and replace the heater core on the 1987 Nissan 300ZX with air, begin by removing the dashboard totally. This means the radio panel and the instrument cluster. Remove all air ducts and access the heater core. Remove the bolts holding the core and replace it with a new core. Then replace the dashboard and instrument panel.
Drain the radiator. disconnect the heater hoses as they go through the firewall. From inside of the cab, remove the heater core housing, then the core. Reverse the procedure to finish the installation.
I need to know how to replace the heater core in a 1987 cadillac seville. I would like to have step by step instructions on the removal and replacemnet of this part. Where it is located and how to remove it
You can access the heater core from the passenger side kick plate in your 1964 Chevrolet Corvette. Remove the heater core water supply hoses. Remove the heater core retaining bolts. The heater core will come out.
i have a 62 cadillac,how do you remove the heater core
After you remove the hoses from the core, remove the nuts and bolts that secure the heater case to the firewall in the engine bay. Inside the cab you will have to remove the glove box assembly for clearance. then disconnect the blower fan wiring. there may be another bolt securing the heater case to the firewall on the inside of the cab. Then you should be able to remove the heater case. You'll have to split the heater case to get to the core.
Remove the water from the cooling system. Remove the water hose from the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
Well You have To Remove The Whole Dash Bord To Get To The Heater Core It Sits Inside Your Car In Behind The Glove Box And Wires