Start by removing the glove box liner. Everything is right behind that.
You can access the heater core from the passenger side kick plate in your 1964 Chevrolet Corvette. Remove the heater core water supply hoses. Remove the heater core retaining bolts. The heater core will come out.
Turn it, then pull up and out.
Pop the door panels. The lock cylinders are just held on with clips.
The actual dash would have to be cut out, as it is attached. The gauge cluster un bolts from the back.
That would depend on what 1964 Chevy you are talking about. A tape measure will provide an answer.
One can purchase a 1964 Chevy Impala online on websites, such as eBay Motors, Oodle Marketplace and Oldride. A 1964 Chevy Impala is a popular old-timer car.
No, the frames are different lengths.
originally it came out in 1964.
Most average vehicles in mid-sixties (Ford, Chevy, Plymouth, Pontiac. Dodge) were priced from $2,800-3200 reasonably equipped. (P.S., auto, radio, heater)
Before you start, take the necessary safety precautions (like disconnecting the battery, etc.) Drain the radiator. Remove the heater hoses. The heater core itself is located under the dashboard on the passenger side. You will most likely need to remove the passenger side wheel well, if not the entire fender to get to all of the bolts. Remove all of the heater box bolts from the firewall. Once all the bolts are out you should be able to pull the cover off from under the dash. Removing the glove box will make access easier, but you can get it out with the glove box in place. Have some towels handy because you will most likely spill some antifreeze on the passenger floor. Assembly is the reverse of removal.
Nothing
how to remove gas tank from 1964 t-bird