why
the horn is easier to get to,if you remove the right side headlight housing!! then you can see horn.
Begin by removing the wiring harness from your 1996 Chevy Corvette horn. Remove the horn retaining bolts. Reverse the process to install the new horn.
* Remove the front bumper fascia * Unplug the horn electrical connector and remove the bracket bolt
botto right front under fender
To replace the horn button on a 2003 Chevy Malibu, first, disconnect the negative battery terminal to avoid any electrical issues. Then, remove the steering wheel airbag by unscrewing the retaining screws behind the steering wheel, carefully disconnect the airbag harness, and set it aside. Next, remove the steering wheel cover to access the horn button, which can be pulled out or unscrewed depending on the design. Finally, install the new horn button, reassemble the steering wheel components, and reconnect the battery.
remove front headlight assembly to get at horn,it is down below light assembly..
cut the cheese
That would be a relay, not a fuse.
Remove the air bag on the steering wheel. Your problem is in there......
right front below headlight housing,,,drivers side!!
first remove wire to horn. see if power is going to horn when horn button is pushed. if it does its a horn problem, if not it is probably in the horn button itself.
behind the grill but in front of the tire. you need to be on your back and look up.