answersLogoWhite

0


Best Answer

Heat the stuck bolt until it's red hot, let it cool completely, turn it out with proper size tool.

User Avatar

Wiki User

8y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove a oil pan bolt that wont turn?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you remove the motor oil bolt from 2005 dodge neon?

Turn counter clockwise


Which direction do you turn the oil pan bolt on a 1997 Oldsmobile silouette it wont come off?

Counter clock-wise


Which direction do you turn oil pan bolt to come off 05 infiniti g35?

what direction do you turn the oil pan bolt to come off a 2005 infiniti g35


How do you change the oil in a2001 suzuki katana 600 cc?

remove the oil filter. let it drain .Then remove the oil drain bolt at the bottom of oil pan and drain it. Put a new filter on and tighten it. Then tighten the drain bolt and fill to level with new oil.


Which way do you turn bolt to drain oil in 2003 trailblazer?

Counterclockwise.


How do you change oil in 2002 Honda xr200r?

there should be a bolt near the bottom of the engine, simply remove bolt and drain oil into pan. put bolt back in and fill with motorcycle oil that meets specifications to Honda


How do you remove the oil cap?

. Turn it anticlockwise


How do you remove the oil in a 1994 Camry?

Use a 14mm wrench to unscrew the bolt at the bottom of the oil pan.


Steps to changing the oil in a 1990 camaro?

put the car on ramps put something to catch the oil under the oil pan open the hood remove the oil cap on the top of the engine unscrew the oil pan boly let it drain then remove the oil filter then once the engine has no oil put the oil pan bolt back in lube the oil filter seal put the new oil filter on and pour the oil in then turn the car on for a second to let the oil run through turn it off then check your oil level and your good to go.


Oil check and oil fill for 2004 YZ 250?

you have to remove the oil check bolt. its about half way up on the clutch cover and is just a regular bolt. remove it...if oil leaks out, the level is good. if no oil comes out, visually inspect it and see if you need to add more in...most likely you will. Fill the crankcase until oil leaks out of the hole where the oil check bolt was. At least this is how i do it for my 04 yz125..


How do you drain the oil a 2005 C320 Mercedes Benz?

You can drain it from the bottom. You will need to remove the bottom under panel, should be 6 8mm bolts, then you can see the drain bolt, remove the drain bolt and you can drain the oil.


Which direction do you turn the oil pan bolt to get it to come off?

counter clockwise