Want this question answered?
i have a 1998 grand cherokie 5.9 how do i remove the pulley what tool do i use
you could use motor to do a investigation and it is a object to use in science.
An electric motor does that.
Electric motor.
The motor is electric, the hot water is typically heated by gas or electric.
You have to unscrew the hex nut that is attaching the pulley to the motor. It can be relatively difficult so get a torque wrench.
Electric Windows generally, have a switch that operates a motor. The motor raises the or lowers the window using either a system of gears or a pulley system.
Use a pneumatic or electric impact wrench.
There are many different ways. On an outboard motor it can be a rope, pulley or an electric motor. Inboard engines are usually bigger and have electric, pnuematic or hydraulic starters. They can also be turned over with a hand crank if not too large.
If you are referring to an electric antenna, there should be a snap-connector to the motor assembly-just remove it.
Removing the crank pulley requires an impact wrench
remove all belts,tensioners etc, remove pulley bolt, use HARMONIC BALENCER PULLEY to remove - DO NOT USE NORMAL PULLEY REMOVER - must be pulled from center of pulley not from outer edge
remove motor mount from right side of motor ,remove belt ;use 13mm socket to go in pulley holes of pump; should be three bolts at 2 o'clock 4o'clock and 7o'clock positions
i have a 1998 grand cherokie 5.9 how do i remove the pulley what tool do i use
an electric tool
The electric motor changes electric energy into mechanical energy.
That depends on how the pulley is mounted on the motor. If the pulley is welded then no most likely you will have to cut it to get it off. However, if the pulley is fixed to the motor using a bolt/s or other fasteners then yes. Warning: The pulley could be press fit onto the motor. If this is the case it can come off but might not be able to ever go back on.