Want this question answered?
Plymouth Acclaim was created in 1989.
Work inward in a circular motion.
in the gas tank..
Depends on the engine
The hampster's dead
Look at right of hand's brake
Usually between the fuel tank and the engine. Ok, it is near the fuel tank, on the passenger side. I have a 1994 Plymouth Acclaim I hope it is in the same spot as yours.
It is the turn signal switch combined with the head lights, wipers, etc.
The fuel filter is on a front corner of the fuel tank.
Mopar ATF+3, or Mopar ATF+4
Remove passenger side Rack and pinion arm and slide out Alternator .
Remove the center bolt for the C/V joint... remove rotor and brake caliper, there is 4 bolts that holds it on, remove the bolts and it will come off and install in reverse order. ============================================================== This isn't true for say, a 1989 Acclaim which has the front wheel bearings pressed it, as well as held in by 3 bolts into the spindle. This I know as Ive replaced both my front hub (wheel bearing) assemblies on my 89 Acclaim LX. ~Technologic80