take two wrenches and break lose all the nuts then tighten one back up to break losse last one same to put back together
If it is a plug -- turn it counterclockwise to remove If it is a "petcock" turn it clockwise to open
Spark plug knock on a 1998 Chevrolet pickup is an indicator that the ignition timing is correct. By adjusting the timing, the knock can be eliminated.
Remove the water return line from your 1998 Chevrolet pickup truck water pump. Remove the water pump belt. Remove the water pump retaining bolts. Reverse the process to install the new water pump.
No it will not.
Drain the radiator into a suitable container. Remove the upper radiator hose at the engine. Remove the 2 bolts holding the thermostat housing and remove the thermostat. Clean both surfaces and install the thermostat and gasket. Install the housing and the upper radiator hose. Top off the radiator.
I really don't know.sorry.
Drain the radiator into a suitable container. At the end of the upper radiator hose on the engine is the thermostat housing. Remove the 2 bolts and remove the housing. Remove the thermostat and clean both surfaces. Install the new thermostat and the housing. Service the radiator as needed.
Chevrolet does not use inertia/reset switches.
Just below the lower radiator hose.
Bottom of the radiator.
It is located just below the lower radiator hose.
Remove the water from the radiator. Remove the radiator hoses. Remove the stabilizing arm from the top of the radiator. Remove the radiator retaining bolts. Reverse the process to install the new radiator.