0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you take out firing pin p89 dc?
Best left to a gunsmith
How do you remove the firing pin from a heritage 22 revolver?
Take it to a gunsmith. Remove cylinder - remove firing pin pin located under rear site - use finishing nail/small center punch ,place against back of firing pin and tap lightly driving pin toward "removed" cylinder
How do you remove the firing pin from a sterling 380 auto?
You need a gunsmith
How do you remove the firing pin of 22 llama pistol?
Best left to a gunsmith
How do you Remove firing pin from s and w 6906?
Best left to a gunmsith.
How do you remove firing pin 12 gauge topper 158?
Get help from a gunsmith
A nstevens 1913 crack shot26 has a firing pin and a firing pin pin you need a firing pin pin?
Find a good gunsmith or machinist
How do you remove the firing pin from a 1917 Springfield Edy Stone30-06 Rifle?
google it.
How do you remove the locking bolt on a Stevens 87A?
Remove the firing pin from the rear and the locking bolt will side out the side of the bolt
How do you remove the firing pin in a Winchester model 275?
This would be best left to a qualified gunsmith.
What is a hammer mounted firing pin?
A firing pin that is mounted on/in a hammer
How is a Accu Tek HC380 firing pin replaced?
Remove the slide. Push firing pin forward with 1/16" pin punch & then put a 3/32" pin punch between the back end of the firing pin & the back of the slot in the slide to hold the firing pin forward. Place the end of a small straight tip screwdriver between the right side end of the safety & the interior wall of the slide. Now twist the screwdriver to move the safety out to the left side of the slide. As you do this slowly, be carefull not to let the safety plunger & spring fly away on you. Mine tends to pretty well stay in the hole & not fly out. Once you have the safety out of the slide, carefully remove the 3/32" pin punch holding the firing pin forward to allow removal of the firing pin & spring. Reverse the procedure to reinstall.
