To remove the firing pin from a Savage 440A shotgun, first ensure the firearm is unloaded and safe to handle. Remove the stock by unscrewing any screws that hold it in place, and then take off the trigger assembly. Next, locate the firing pin assembly, which is usually secured by a retaining pin or screw; remove this fastener, and then gently pull the firing pin out from the bolt assembly. Always refer to the manufacturer's instructions or a gunsmith for detailed guidance if uncertain.
looking for firing pin and pin spring for 1905 savage 22lr
Numrich eparts
Take it to a gunsmith. Remove cylinder - remove firing pin pin located under rear site - use finishing nail/small center punch ,place against back of firing pin and tap lightly driving pin toward "removed" cylinder
Since Meriden stopped production in 1918 the firing pin will have to be made. The model 15 was made from a savage patent so you might be able to adapt a firing pin from an early model savage rifle. I saw a picture of the model 15 on the web and it looks a lot like the savage model 29 that was made in 1929-1933.
To remove the firing pin from a Winchester Model 100, first ensure the firearm is unloaded and safe to handle. Disassemble the rifle by removing the stock and bolt assembly. Once the bolt is accessible, locate the firing pin retaining pin or screw, remove it, and gently slide out the firing pin from the bolt assembly. Reassemble the rifle by reversing the disassembly steps.
You need a gunsmith
Best left to a gunsmith
Get help from a gunsmith
Best left to a gunmsith.
website for gunpartscorp, letter S, Savage, Model 73, and there is a parts diagram.
Remove magazine,cock and lock it,then firmly hold the firing pin section,turn it clockwise and full with care,then unlock the slide carefully,done
Find a good gunsmith or machinist