Step 1: There is a long piece of plastic under the seat on the left side. Remove it.
To remove it, turn the nickel-sized, notched circle that is near the bottom of the long plastic piece. A big flat head screwdriver will do. This unlocks the plastic, so you just have to jostle it out after that.
Step 2: There is now an exposed bolt that you can see holding the seat to the frame. Remove the bolt and you are done.
Now you can get to the battery, which is probably what you were trying to do.
(Some people say you have to do the same thing on the other side, but on mine it is only on the left, from the perspective of someone sitting on the bike.)
there is a spot in the back next to the rear light where you turn the key and it should release the seat and you just pull it up.
The 1994 Yamaha motorcycle seat is held on with four retaining bolt. Remove the retaining bolts and the seat will come off.
There are many reputable steam cleaners to choose from but the best one for you depends upon your own specific needs. One you identify that you can check out web sites to find the product.
How do you remove seat off Kawasaki nomad
you must remove the bolt behind the rear seat and remove the rear seat then you will see 2 small Allen head bolts remove them and the seat will come right off.
Remove lower seat bottom. Remove two bolts from bottom of seat back. Lift seat back off of its hooks. Remove from car. Use Philips screwdriver to remove 4 screws holding speaker grille to seat back frame.
underneath the back of the seat there are 2 crews undo them then take off the seat
remove the passenger pad first, when removed it uncovers screws on the rear of the drivers seat. Remove these and it comes off.
You have to remove the Allen bolt on the rear of the passenger seat, then remove the two Allen bolts exposed when you removed the passenger seat. The driver seat should slide back and off now.
the seat comes off with the plastic rear fenders as one piece. only after the fenders are taken off can the seat actually be removed
Use your key on the left side by the seat. turn it counterclockwise. and the front seat should pull off. Once you remove the front seat there are two releases to remove the rear seat.
Remove a bolt (hex) from either side at the bottom of the seat. Near the shock.
pop off seat for kawasaski mojave 250cc1989-2005
open the toolbox on the back, and remove the screws inside it holding the seat on, it lifts right off after that.
Move the seat all the way forward then remove the nuts or bolts from rear. Move the seat all the way back then remove the front nuts or bolts. Tip the seat back and disconnect the electrical plug(s). Remove the seat from vehicle.