answersLogoWhite

0

You have to remove the plastic shroud from under the car, and usually it is on the front side of the motor. its 2 or 3 bolts, and it will just drop right out. go to your local parts store and look at the starter before you go to drop it out so you know which bolts to take off.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

Where is the soleniod in a Oldsmobile eighty eight?

on top of the starter


How do you find the starter on an Oldsmobile Eighty-eight?

just follow the positive cable wire from the battery


How do you find the starter on an Oldsmobile Eighty eight?

just follow the positive cable wire from the battery


Can a 1992 Oldsmobile Eighty Eight 3800 engine work in a 1996 Oldsmobile Eighty Eight?

No.


How do you remove spark plugs from an Oldsmobile eighty eight?

5/8 plug wrench


Oldsmobile eighty eight?

and your question is what?


How do you remove the starter on a 1994 olds eighty-eight?

i usually remove stuff with a hammer, but if you want it to work after wards go to a mechanic.


How do you change your transmission fluid on a 1998 Oldsmobile eighty-eight?

Remove transmission oil pan for access to filter and to drain fluid


Where is the pass-key module located on a 1992 Oldsmobile Eighty Eight?

in the dashboard,remove the glove box then it is just above the ecm.


Where is the starter on a 1995 Oldsmobile Eighty Eight?

look down in the front of the engine and lower right side under the exhaust pipe. you should be able to see it and the wires connected to it.


How do i Set clock 1993 Oldsmobile eighty eight?

Let Patrick do it!


How do you remove 1999 Oldsmobile eighty eight headlight?

To remove the headlight from a 1999 Oldsmobile Eighty Eight, first, open the hood and locate the headlight assembly. Disconnect the electrical connector by pressing the tab and pulling it out. Next, remove the retaining screws or clips securing the headlight assembly to the vehicle, then gently pull the assembly forward to detach it from the vehicle. Finally, replace the bulb if needed and reinstall the assembly in reverse order.