How do you remove a stereo in a 2000 Honda CR-V?

Answer 1

First remove the glove box by removing 2 screws at the base of the door. Then remove plastic piece at the base of the center console, there should be a plastic push screw on each side and then pull out (2 clips will release). Next there are 2 screws on the panel below the steering wheel, one to the R of the key input and one near the driver side door. Next there are 4 screws in the bottom flip down door on the center console, removing all 4 of these screws should release the whole unit. By applying a decent amount of pressure, you'll pull the section out (there are numerous plastic and metal clips which release eventually... Next you'll need to remove the entire bottom section of the center console (cupholders, ashtray etc..). By doing this you'll give yourself room to reach up into behind the radio. Next, there are 2 silver screws, one on each side of the center console, these are directly screwed into the stereo casing. REmoving these will now allow you to reach up behind the radio and push out with moderate force. There are about 4 clips holding the stereo in and these will release when pressure is placed evenly across the back of the unit. After this its pretty self explanatory. (removing screws to release the radio!)