0
How do you remove a stuck CD from a Factory installed 5 disc changer on a 2001 Chrysler LHS?
Wiki User
∙ 14y ago
You hold two of the "buttons" down at a time and hold for at least 15 seconds (the ones for disc 1 and 2 for example). You may have to play around a bit but you will find the combination for ejecting the disc. It seems to depend on which slot the disc is in, for example in slot 1 or slot 2, etc.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you remove a CD changer from the boot of a Audi s3?
Remove the retaining cover from the front of the CD changer. Remove the CD changer retaining screws. Remove the wiring harness from the back of the CD changer.
How do you remove the 6 CD changer on a 03 Tahoe?
Remove the decorative cover from your 2003 Chevrolet Tahoe six CD changer. Remove the CD changer retaining screws. Remove the wiring harness from the back of the CD changer.
How do you remove the security system from a 1998 Chrysler?
The factory alarm is part of the computers on the vehicle and can not be removed.
50 dollar car you want to remove the factory alarm on a 96 chrysler sebring?
It can not be removed or disabled.
How do you remove the CD changer in a 2002 Chrysler Town and Country?
Very simple. I'm assuming it's the factory single disc changer. First, remove the plastic cover that surrounds the AC vents. There may be some screws at the bottom. There also will probably be a small plastic piece under the stereo that will need to be removed (screws on bottom). After that, the bolts that secure the CD player will be exposed. Remove the bolts and pull out the CD player. Be careful because the wires are not that long. Undo all the electrical connections, and you're done.
How do you remove a visteon 6 CD changer from the dash of a 2004 fleetwood revolution?
Begin by removing the wiring harness from the back of your CD changer. Remove the CD changer retaining bolts. The CD changer will come out.
How do you remove the alarm on a 2005 Chrysler Sebring?
The factory alarm is an integrated part of the computer system of the vehicle and can not be removed.
Where is the 02' Chrysler concord factory amp location?
right side, behind glove box. you will need to remove it
What size wrench is used to remove oil drain plug on 2000 Chrysler LHS?
The factory plug used a 13mmThe factory plug used a 13mm
How do you remove the factory installed windshield wiper blades on a 2002 Ford Focus SE?
they are hinges, just unhinge them
Does a Core 2 Duo have to be factory installed?
Although it is best to purchase a computer that contains a Core 2 Duo factory installed in it, you can install it yourself. It is quite easy. You remove your computer's casing. Plug in the part. After you have installed the component, you simply install the drivers and software to your computer and it will work just as if it had been installed by professionals.
How do you remove the factory stereo on a 2002 Nissan Frontier?
go to0 a stereo shop and buy one and have it installed go to0 a stereo shop and buy one and have it installed
